Numerical study on premixing characteristics and explosion process of starch in a vertical pipe under turbulent flow

Fire and explosion accidents are frequently caused by combustible dust, which has led to increased interest in this area of research. Although scholars have performed some research in this field, they often ignored interesting phenomena in their experiments. In this paper, we established a 2D numerical method to thoroughly investigate the particle motion and distribution before ignition. The optimal time for the corn starch dust cloud to ignite was determined in a semi-closed tube, and the characteristics of the flame propagation and temperature field were investigated after ignition inside and outside the tube. From the simulation, certain unexpected phenomena that occurred in the experiment were explained, and some suggestions were proposed for future experiments. The results from the simulation showed that 60–70 ms was the best time for the dust cloud to ignite. The local high-temperature flame clusters were caused by the agglomeration of high-temperature particles, and there were no flames near the wall of the tube due to particles gathering and attaching to the wall. Vortices formed around the nozzle, where the particle concentration was low and the flame spread slowly. During the explosion venting, particles flew out of the tube before the flame. The venting flame exhibited a “mushroom cloud” shape due to interactions with the vortex, and the flame maintained this shape as it was driven upward by the vortex.     

Effect of admixture of solid inertant on fire hazard of dust layers oriented at varying degrees of inclination

Unlike metallic dust layers, the layer flammability levels (LFL) of non-metallic dust layers exhibit a wide range from Class 1 (No self-sustained combustion) to Class 6 (explosive combustion). However, determinations of layer flammability have not considered the effect of inclination angle, thereby potentially underestimating fire hazard of combustible dust layers in many industrial situations. In this research, inclined dust layers showed greater fire hazard than did horizontally oriented dust layers. For example, LFL of wood dust jumped from class 3 to class 5 when layers were positioned with an incline. Flame spread rate of PMMA dust layers increased from 1.8 to 3.6 mm/s when the angle of inclination increased from 0 to 40°. Even small amounts of solid inertant significantly decreased surface layer fires. The required amount of inertant to completely inert layer fires was far less than that for smoldering layer fires or dust explosions.     

集输油环境氟橡胶O形圈老化行为实验研究*

为研究氟橡胶O形圈在集输油环境中的老化行为特征，以长庆油田使用的氟橡胶O形圈(位于非金属复合管连接接头处)为研究对象，采用宏观与微观相结合的方法，通过挂片实验分析氟橡胶O形圈在不同介质（采出油，采出水）、温度（25，50 ℃）、压力条件（0.1,4,6 MPa）下老化后的形貌、质量、拉伸性能及硬度。结果表明:采出油、采出水均能引起O形圈发生溶胀，从而降低O形圈的强度、韧性、硬度；采出水引起的溶胀显著高于采出油更易导致O形圈表面产生坑洞缺陷；渗透速率随温度升高而急剧增加，压力对渗透速率的影响不明显；硬度降低较小，最大降幅为4.17%。结合现场服役813 d的密封圈SEM形貌，证实集输介质渗透会引起氟橡胶圈溶胀、导致表面产生坑洞等缺陷。     

中国SO_2排放对日本SO_2浓度及硫沉降的影响

利用相关文献及来自酸沉降网的中、日两国各观测站点的SO2监测资料,分析了近十年来中国SO2的污染现状、趋势及排放量对下风向日本各观测站点SO2浓度及硫沉降量的影响。结果表明,通过文献分析可知,2001—2009中国的SO2年均质量浓度分布在40~50μg/m3,总体呈下降趋势;中国部分城市的SO2年均浓度与中国SO2排放量的相关性总体高于日本各观测站点的SO2年均浓度与中国SO2排放量的相关性,中国的SO2排放对日本各观测站点的SO2年均浓度影响总体较小;情景模拟分析发现,中国SO2排放量对日本各观测站点SO2年均浓度的贡献率在7.5%~44.0%,平均贡献率为22.6%;中国SO2排放量对日本各观测站点硫沉降的贡献率在8%~41%,平均贡献率为22.1%。     

Law of variation for low density polyethylene dust explosion with different inert gases

To reveal the effects of different inert gases on explosion characteristics during low density polyethylene (LDPE) dust explosion and optimize the explosion-proof process, eight N₂ (CO₂)/air mixed inerting conditions were experimentally studied. Typical inerting conditions with 12 L cylindrical explosive tank were used to study the characteristics on the flame propagation. The thermogravimetric analysis with related theories were used to further explain the mechanism and quantities in low density polyethylene (LDPE) dust explosion with different inert gases. The results showed that the reduction of O₂ concentration could effectively delay the progress of flame growth process and weaken the effect of dust combustion reaction. The flame growth process of condition (N₂/air (18% O₂)) was 2.05 times slower than that of the non-inert condition. The explosion strength was obviously reduced, and the characteristic parameters such as explosion pressure and flame propagation speed were also affected by the decrease of O₂ concentration. For LDPE powder, the smaller the median diameter, the greater the explosion intensity and the lower the limiting oxygen content (LOC). The LOC with CO₂ was usually higher than that with N₂ and the effect of CO₂ was significantly better than N₂ in inerting.     

Ignition temperatures of dust layers and bulk storages in hot environments

In many industrial installations, particulate solids (cereals, agri-food products, coal, plants, etc.) are stored or processed. Self-heating of these products, which can lead to fires and explosions, can occur in a variety of situations. Examples include large storage at room temperature, formation of a layer on a hot surface, layer deposited on a surface – insulating or conductive – in a hot environment or even storage of product exposed to heating on one side.The main parameters that determine the occurrence of self-heating are the size of the container, the temperature, the residence time and the characteristics of the product. Depending on the type of situation encountered and these implementation conditions, the analysis of self-heating risks must be based on specific models and/or parameters.This paper presents the different variants and combinations of the theoretical model from the theory of thermal runaway to represent self-heating, taking into account in particular the symmetry or asymmetry of heating, reagent consumption and boundary conditions. It also discusses their adaptation to the previous identified industrial situations.Nine products were chosen to be representative of those used in the different considered industrial situations. They were subjected to self-heating basket tests in isothermal ovens in order to determine the parameters for applying the described theoretical models. These results were compared with the results of self-heating tests in layers of different thicknesses in a hot environment, on an insulating or conductive plate, using a specially developed test protocol, as well as with the results of standardized tests of minimum ignition temperature in 5 mm layers.This led to the proposal of the most appropriate theoretical model to represent the self-heating phenomenon for each of the four identified industrial situations.This analysis can promote better design of industrial equipment and production conditions (temperatures, volumes or product flows …) in order to prevent fires and explosions.     

土壤钙的生物有效性及与其它元素的相互作用

根据国内有关土壤钙素的研究文献、总结了土壤钙的生物有效性.土壤钙与其它元素的相互作用,以及钙在土壤中的固定、移动的研究进展,提出了钙肥的施用原则.其施用原则应该是平衡且适量。     

静电除尘在球团竖炉烟尘治理上的应用

介绍了球团竖炉烟尘治理的改造经验,总结了电除尘工程概况及效果。     

韶钢水泥厂的粉尘污染及综合防治措施

韶钢水泥厂在进行干法生产时,会产生大量的粉尘,严重影响生产和厂区周围居民的正常生活,危害严重。通过一些综合防治措施,不仅保护了环境,而且还可回收数量可观的有价原料、成品或半成品。     

化学纤维栅湿式过滤除尘的实验研究

化学纤维栅湿式除尘是一种复合机理的新型湿式过滤除尘技术,其过滤风速为2～10m/s,阻力仅为200～500Pa,除尘效率达到99.62％,能很好解决矿山溜井卸矿产生的粉尘,使溜井含尘气流经净化后达到新鲜风流卫生标准。